Harper milky white linen blouse

SIZING & FIT
This garment is a loose-fitting cut. If you want to wear this piece as close-fitting, select a smaller size than you usually wear. Before placing an order, check the approximate measurements of the finished garment given among the pictures.

FREE CUSTOMIZATION
Important: We can make the garment longer by adding 15cm | 6″ free of charge
Possible changes:
Lengthen | shorten the garment
Lengthen | shorten the sleeves
Change the color to one that is not listed but available on the color palette

The above alterations make the item non-returnable and non-refundable.

The model is 5’9″ (175cm) tall with 82cm/32″ bust, 62cm/24″ waist, 89cm/35″ hips, and she is wearing XS in milky white.

XXS
Front length ± 57cm | 22.4″
Back length ± 65cm | 25.9″
Bust ± 112cm | 44.1″
Sleeve length ± 34.5cm | 13.6″
Sleeve width ± 40.5cm | 15.9″
XS
Front length ± 58cm | 22.8″
Back length ± 66cm | 26″
Bust ± 116cm | 45.7″
Sleeve length ± 35cm | 13.8″
Sleeve width ± 42cm | 16.5″
S
Front length ± 59m | 23.2″
Back length ± 67cm | 26.3″
Bust ± 120cm | 47.2″
Sleeve length ± 35.5cm | 14″
Sleeve width ± 43.5cm | 17.1″
M
Front length ± 60cm | 23.6″
Back length ± 68cm | 26.7″
Bust ± 124cm | 48.8″
Sleeve length ± 36cm | 14.1″
Sleeve width ± 45cm | 17.7″
L
Front length ± 61cm | 24″
Back length ± 69cm | 27.1″
Bust ± 128cm | 50.4″
Sleeve length ± 36.5cm | 14.4″
Sleeve width ± 46.5cm | 18.3″
XL
Front length ± 62cm | 24.4″
Back length ± 70cm | 27.5″
Bust ± 132cm | 52″
Sleeve length ± 37cm | 14.6″
Sleeve width ± 48cm |18.9″
XXL
Front length ± 63cm | 24.8″
Back length ± 71cm | 27.9″
Bust ± 136cm | 53.5″
Sleeve length ± 37.5cm | 14.7″
Sleeve width ± 49.5cm |19.4″

MATERIAL & CARE
The garment is available in medium weight linen, which is pre-washed and softened during the fabric manufacturing process. The garment should be washed in low-temperature water (30-40C) on a gentle cycle. Avoid tumble drying to prevent color fading. Use environment-friendly laundry detergent. Do not bleach. Take the clothes out while they are still damp and air-dry. To remove wrinkles, iron the inside out, and set a low heat on the iron.